zxms6006dt8 document number: ds35143 rev. 1 - 2 1 of 9 www.diodes.com december 2010 ? diodes incorporated zxms6006dt8 advance information a product line o f diodes incorporated intellifet ? is a trademark of diodes incorporated, registered in the united states and other jurisdictions worldwide. 60v dual n-channel self prot ected enhancement mode intellifet ? mosfet product summary ? continuos drain source voltage 60v ? on-state resistance 100m ? nominal load current (v in = 5v) 2.8a ? clamping energy 210mj description and applications the zxms6006dt8 is a dual self protected low side mosfet with logic level input. it integrates over -temperature, over-current, over- voltage (active clamp) and esd protected logic level functionality. the zxms6006dt8 is ideal as a general purpose switch driven from 3.3v or 5v microcontrollers in harsh environments where standard mosfets are not rugged enough. ? lamp driver ? motor driver ? relay driver ? solenoid driver features and benefits ? compact high power dissipation package ? low input current ? logic level input (3.3v and 5v) ? short circuit protection with auto restart ? over voltage protection (active clamp) ? thermal shutdown with auto restart ? over-current protection ? input protection (esd) ? high continuous current rating ? green, rohs compliant (note 1) ? halogen and antimony free. (note 2) ? qualified to aec-q101 standards for high reliability mechanical data ? case: sm-8 ? case material: molded plastic, ?green? molding compound. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: matte tin finish ? weight: 0.117 grams (approximate) ordering information (note 3) product marking reel size (inches) tape width (mm) quantity per reel ZXMS6006DT8TA zxms6006d 7 12 1,000 notes: 1. contain <900ppm bromine, chlorine (<1500ppm total) and <1000ppm antimony compounds. 2. diodes inc?s ?green? policy can be found on our website at http://www.diodes.com 3. for packaging details, go to our website at http://www.diodes.com marking information top view sm-8 top view pin-out zxms6006d = product type marking code device symbol top view in1 s1 s2 in2 d1 d1 d2 d2 1 zxms 6006d pin 1 d2 s2 in2 d1 s1 in1
zxms6006dt8 document number: ds35143 rev. 1 - 2 2 of 9 www.diodes.com december 2010 ? diodes incorporated zxms6006dt8 advance information a product line o f diodes incorporated intellifet ? is a trademark of diodes incorporated, registered in the united states and other jurisdictions worldwide. functional block diagram
zxms6006dt8 document number: ds35143 rev. 1 - 2 3 of 9 www.diodes.com december 2010 ? diodes incorporated zxms6006dt8 advance information a product line o f diodes incorporated intellifet ? is a trademark of diodes incorporated, registered in the united states and other jurisdictions worldwide. maximum ratings @t a = 25c unless otherwise specified characteristic symbol value units continuous drain-source voltage v ds 60 v drain-source voltage for short circuit protection v ds ( sc ) 16 v continuous input voltage v in -0.5 ... +6 v continuous input current @-0.2v v in 6v continuous input current @v in < -0.2v or v in > 6v i in no limit i in 2 ma pulsed drain current @v in = 3.3v ( note 6) i dm 11 a pulsed drain current @v in = 5v ( note 6) i dm 13 a continuous source current (body diode) (note 4) i s 2 a pulsed source current (body diode) i sm 12 a unclamped single pulse inductive energy, t j = 25 q c, i d = 0.5a, v dd = 24v e as 210 mj electrostatic discharge (human body model) v esd 4000 v charged device model v cdm 1000 v thermal characteristics @t a = 25c unless otherwise specified characteristic symbol value units power dissipation at t a = 25 q c (notes 4 & 7) linear derating factor p d 1.16 9.28 w mw/ q c power dissipation at t a = 25 q c (notes 4 & 8) linear derating factor p d 1.67 13.3 w mw/ q c power dissipation at t a = 25 q c (notes 5 & 7) linear derating factor p d 2.13 17 w mw/ q c thermal resistance, junction to ambient (notes 4 & 7) r ja 108 q c/w thermal resistance, junction to ambient (notes 4 & 8) r ja 75 q c/w thermal resistance, junction to case (notes 5 & 7) r jc 58.7 q c/w thermal resistance, junction to case (note 9) r jc 26.5 q c/w operating temperature range t j -40 to +150 q c storage temperature range t stg -55 to +150 q c notes: 4. for a dual device surface mounted on a 25mm x 25mm single sided 1oz weight copper split down the middle on 1.6mm fr4 board, in still air conditions. 5. for a dual device surface m ounted on fr4 pcb measured at t 10sec 6. repetitive rating25mm x 25mm fr 4 pcb, d = 0.02, pulse width = 300s ? pulse widt h limited by junction temperature. refer to transient thermal impedance graph. 7. for a dual device with one active die. 8. for a dual device with 2 active die running at equal power. 9. thermal resistance from junction to the mounting surface of the drain pin.
zxms6006dt8 document number: ds35143 rev. 1 - 2 4 of 9 www.diodes.com december 2010 ? diodes incorporated zxms6006dt8 advance information a product line o f diodes incorporated intellifet ? is a trademark of diodes incorporated, registered in the united states and other jurisdictions worldwide. recommended operating conditions the zxms6006dt8 is optimized for use with c operating from 3.3v and 5v supplies. characteristic symbol min max unit input voltage range v in 0 5.5 v ambient temperature range t a -40 125 c high level input voltage for mosfet to be on v ih 3 5.5 v low level input voltage for mosfet to be off v il 0 0.7 v peripheral supply voltage (voltage to which load is referred) v p 0 16 v thermal characteristics 11 0 10m 100m 1 10 25x25x1.6mm fr4 single 1oz cu one active die limited by over-current protection single pulse t amb =25c limited by r ds(on) 1ms 10ms 100ms 1s dc safe operating area i d drain current (a) v ds drain-source voltage (v) limit of s/c protection 0 25 50 75 100 125 150 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1 active die derating curve temperature (c) max power dissipation (w) 2 active die 100 1m 10m 100m 1 10 100 1k 0 20 40 60 80 100 120 25x25x1.6mm fr4 single 1oz cu one active die t amb =25c transient thermal impedance d=0.5 d=0.2 d=0.1 single pulse d=0.05 thermal resistance (c/w) pulse width (s) 100 1m 10m 100m 1 10 100 1k 1 10 100 25x25x1.6mm fr4 single 1oz cu one active die single pulse t amb =25c pulse power dissipation pulse width (s) maximum power (w)
zxms6006dt8 document number: ds35143 rev. 1 - 2 5 of 9 www.diodes.com december 2010 ? diodes incorporated zxms6006dt8 advance information a product line o f diodes incorporated intellifet ? is a trademark of diodes incorporated, registered in the united states and other jurisdictions worldwide. electrical characteristics @t a = 25c unless otherwise specified characteristic symbol min typ max unit test condition static characteristics drain-source clamp voltage v ds ( az ) 60 65 70 v i d = 10ma off state drain current i dss - - 1 a v ds = 12v, v in = 0v - - 2 v ds = 36v, v in = 0v input threshold voltage v in ( th ) 0.7 1 1.5 v v ds = v gs , i d = 1ma input current i in - 60 100 a v in = +3v - 120 200 v in = +5v input current while over temperature active - - - 400 a v in = +5v static drain-source on-state resistance r ds(on) - 85 125 m v in = +3v, i d = 1a - 75 100 v in = +5v, i d = 1a continuous drain current (notes 4 & 8) i d 2.0 - - a v in = 3v; t a = 25 c 2.2 - - v in = 5v; t a = 25 c continuous drain current (notes 4 & 7) 2.6 - - v in = 3v; t a = 25 c 2.8 - - v in = 5v; t a = 25 c current limit (note 10) i d(lim) 4 8 - a v in = +3v 6 13 - v in = +5v dynamic characteristics turn on delay time t d ( on ) - 8.6 - s v dd = 12v, i d = 1a, v gs = 5v rise time t r - 18 - s turn off delay time t d ( off ) - 34 - s fall time f f - 15 - s over-temperature protection thermal overload trip temperature (note 11) t jt 150 175 - c - thermal hysteresis (note 11) f f - 10 - c - notes: 10. the drain current is restricted only when the device is in saturation (see graph ?typical output characteristi c?). this allows the device to be used in the fully on state wit hout interference from the current limit . the device is fully protected at all drain currents, as the low power dissipation generated outside saturation makes current limit unnecessary. 11. over-temperature protec tion is designed to prevent device destruction under fault conditions. faul t conditions are considered as ?outside? normal operating range, so this part is not designed to withstand over-temperature for extended periods ..
zxms6006dt8 document number: ds35143 rev. 1 - 2 6 of 9 www.diodes.com december 2010 ? diodes incorporated zxms6006dt8 advance information a product line o f diodes incorporated intellifet ? is a trademark of diodes incorporated, registered in the united states and other jurisdictions worldwide. typical characteristics 0123456789101112 0 2 4 6 8 10 12 14 16 -50 -25 0 25 50 75 100 125 150 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0.00 0.05 0.10 0.15 0.20 -50 -25 0 25 50 75 100 125 150 0.00 0.05 0.10 0.15 0.20 012345 0 20 40 60 80 100 120 0.4 0.6 0.8 1.0 0.01 0.1 1 10 3v 2.5v 2v 5v 4.5v 4v 3.5v 3v typical output characteristic t a = 25c v in i d drain current (a) v ds drain-source voltage (v) threshold voltage vs temperature v in = v ds i d = 1ma v th threshold voltage (v) t j junction temperature (c) t j = 150c on-resistance vs input voltage t j = 25c r ds(on) on-resistance ( ) v in input voltage (v) i d = 1a reverse diode characteristic v in = 3v v in = 5v on-resistance vs temperature t j junction temperature (c) r ds(on) on-resistance ( ) input current vs input voltage i in input current ( a) v in input voltage (v) v sd source-drain voltage (v) i s source curent (a) t j =25c t j =150c
zxms6006dt8 document number: ds35143 rev. 1 - 2 7 of 9 www.diodes.com december 2010 ? diodes incorporated zxms6006dt8 advance information a product line o f diodes incorporated intellifet ? is a trademark of diodes incorporated, registered in the united states and other jurisdictions worldwide. typical characteristics - continued -50 0 50 100 150 200 250 300 0 2 4 6 8 10 12 -50 0 50 100 150 200 250 300 0 2 4 6 8 10 12 0 5 10 15 0 2 4 6 8 switching speed v in drain-source voltage (v) time ( s) v ds i d =1a v ds v in switching speed drain-source voltage (v) time ( s) i d =1a typical short circuit protection v in = 5v v ds = 15v r d = 0 i d drain current (a) time (ms)
zxms6006dt8 document number: ds35143 rev. 1 - 2 8 of 9 www.diodes.com december 2010 ? diodes incorporated zxms6006dt8 advance information a product line o f diodes incorporated intellifet ? is a trademark of diodes incorporated, registered in the united states and other jurisdictions worldwide. package outline dimensions dim millimeters inches dim millimeters inches min max typ. min max typ. min max typ. min max typ. a - 1.7 - - 0.067 - e1 - - 4.59 - - 0.1807 a1 0.02 0.1 - 0.008 0.004 - e2 - - 1.53 - - 0.0602 b - - 0.7 - - 0.0275 he 6.7 7.3 - 0.264 0.287 - c 0.24 0.32 - 0.009 0.013 - lp 0.9 - - 0.035 - - d 6.3 6.7 - 0.248 0.264 - - 15 - - 15 - e 3.3 3.7 - 0.130 0.145 - - - 10 - - 10 suggested pad layout 2.8 0.110 6.8 0.268 4.6 0.181 0.95 0.037 1.52 0.060 mm inches
zxms6006dt8 document number: ds35143 rev. 1 - 2 9 of 9 www.diodes.com december 2010 ? diodes incorporated zxms6006dt8 advance information a product line o f diodes incorporated intellifet ? is a trademark of diodes incorporated, registered in the united states and other jurisdictions worldwide. important notice diodes incorporated makes no warranty of any kind, express or implied, with regarding to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability arising out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated a nd all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support dev ice or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2010, diodes incorporated www.diodes.com
|
